Metalized Polyester Films Specifications

STYLETECHTM V-9000-00 SERIES 2 Mil Metalized Polyester Film with Permanent Solvent-Based Acrylic Adhesive

Typical Physical Properties: 2 Mil premium cast film with permanent acrylic adhesive.

A. PHYSICAL PROPERTIES:
Film Thickness (mils)
 2 mils
Liner Thickness
 90 lb. stayflat
B. ADHESION PROPERTIES:
Peel - PSTC - 1 (instant R.T.)
 50 oz/in.
Shear - PSTC 7
 1000 grams/1" wide, 250 hours/no failure
C. RESISTANCE RATINGS
Water
 Excellent (submerged for 1 week in 70º water 24 hr. after applied to substrate.)
Humidity
 Excellent
Abrasion
 Good
Solvent
 Good. Edge sealing recommended for best results.
D. SERVICE TEMPERATURE: -40º F to 250º F

E. SHELF LIFE: 2 Years stored under 70º F and 50% relative humidity.

F. OUTDOOR DURABILITY: 2 years for silver chrome and holographics. Gold chrome for indoor use only.
NOTE:
All information based on tests believed to be reliable. These values do not constitute guaranty and do not constitute a warranty.
Purchaser is to independently determine suitability of this material for specific purpose.

Site Design & Maintenance By : DEParkins.com